Top rated products
Universal Tubular Furnace Q25115T20
Product Details
Maximum Temperature range should be upto 1200 °C
Continuous Operating Temperature: 1100 °C
Temperature Accuracy while operating the furnace: +/-1°C (+/-1.8°F)
Tube Length (approx.): 500 mm
Tube Diameter: 60 mm
Tube Material of the tubular furnace: Ceramic/Quartz
Uniform Heating Zone length inside the tube furnace: 150 mm (ΔT = 5 C)
Compact design of the furnace: Vertical or horizontal operation freely adjustable
Working height freely adjustable: Adjustable height 300mm
Power Supply Input: Single Phase, 220 V, 50 Hz
Power Rating: 2.5 KW
Heating Element: Kanthal A1
Temp. Sensor: K Type
Temp. Controller: Microprocessor based programmable controller (Eurotherm)
Furnace Dimension (Approx): Length 600 mm, Height 800mm, Width 500mm
External Chamber construction: SS 304
Warranty Period: 12 Months
Vacuum Oven
Inner size 300x400x400 and material SS-304 grade
Outer body SS-304 size 500x600x700 with front door and front door will have view port
Inside two detachable tray will provide
Power rating – approximately 3kv single phase 230v
Analogue vacuum gauge, vacuum port, went port, Fuji temperature controller with thirstier with K type thermocouple
Vacuum Pump
150 LPM double stage rotary vacuum pump
Solenoid non-return valve for rotary pump oil
Exhaust inline filter
1″ SS bellow with KF25 end connector 1 mtr length
1″ Butterfly valve with end flanges
Digital Pirani Gauge with single sensor
1″ T joint with KF25 & KF10
KF25 clamp and O-ring holder set
KF16/10 clamp and O-ring holder set
Compound Gauge Analogue
Silicon 1/4″ tube
1/4″ Brass nozzles
Vacuum Tube Furnace
Specification of Vacuum Tubular Furnace:-
Model Number: Q25150T10D85
Max Temp. 1500°C
Cont. Oprt. Temp: 1400°C
Tube Length: 1000 (mm)
Tube Dia: OBE (75 i/d x 85 o/d)
Furnace Chamber Size: 160 W × 150 H × 300 L (mm)
Heating Elements: SiC
Thermocouple: R type
TEMPERATURE CONTROL: Microprocessor-based Digital PID Temperature Programmer/Controller, with 0-5 V output for the Thyristor System
Vacuum & other Accessories
Heat-Up Rate Limit: Maximum 6°C per minute
Skin Temperature: Not more than 30°C above ambient
Power Supply / Rating:230V, Single Phase, AC, 50 Hz / 4 kW
Thyristor System: ‘BYSOTHERM’ makes a Soft Start with the Current Control system through
External Potentiometer for Manual Adjustment of Element Current
Temperature Protector: Solid State with Auto Reset
Double stage Direct driven Rotary Vacuum Pump : (Displacement capacity, 100Ltrs/Min), with in-built gas ballast and no-load ultimate vacuum better than 10–2 m.bar
1440 rpm Electric Motor
Digital Pirani Gauge
- S. Tee having KF-25 End Flanges
- S. Adapter having KF-25 End Flange
Butterfly Valve and Ribbed Nipple/Nozzle
Gas Flow Control & Accessories
Flowmeter: 0.15 – 1 litre/min
Needle Valve assembled on the Base of the furnace control panel
Argon gas Cylinder (47 Lit.)
Dual Stage Pressure Regulator
Vertical Two Zone Bridgman Furnace up to 1200 °C
Model No: Q25110B1
Features
- Double-walled Vertical Tubular Bridgman Furnace
- 2 Nos of independently controllable heating zones
- Rigid platform Mounted
- Maximum Temperature 1200 °C Accuracy: +/- 1 °C
- Continuous Working Temperature: 1100 °C Accuracy: +/- 1
- Ramp Rate :0 to 500°C /Hr
- Number of Heating Zones: 2 Zones
- Heating Zones Size: Length: 35cm
- 2 zones Gap between zones: 5cm
- Total heated length: 75 cm
- Furnace Dimension W X H X D: 700mm X 1500mm X 600mm
- Working zone: ID 120 mm, Tube length: 1000 mm
- Internal Chamber Construction: High quality ceramic fiber
- vacuum formed board of 1450°C and 1250°C ensuring
- minimum heat loss
- Fully automated PLC/PC-based software control
- Programmable temperature controller – 2 nos
- Safety controller – 2 nos
- Servo motor drive – 2 nos.
- Innovance make Servo motor with servo controller
- Speed Control: O.l mm/Hr to 30mm/Hr
- Up and Down both movement control
- Working Load Capacity: 5 kg
- Digital Display
- Innovance make Servo motor with servo controller
- Rotation Type : Continuous bidirectional rotation
- Speed Range : 0-90 RPM (adjustable)
- Speed Resolution 0.1 RPM
- Pulling Speed Range 0.1 mm/hr to 10,000 mm/hr
- Speed Resolution : ≤ 0.01 mm/hr
- Motion Accuracy ±0.01 mm
- Load Capacity Suitable for ampoules up to 3-5 kg
- Controlling Thermocouple: K-Type controlling sensors
- Easy Replacement of Heating Element
- Heating Element: Kanthal APM wire element
- Outer chamber construction material: Powder coated
MS/SS304
-
- Construction Type: Double Skinned
- Double Walled Chamber Wall Thickness: 2 mm
- Outer Surface Temperature less than 50°C for 1100°C
Operating temperature
- 440 V AC, three-phase
- Power Consumption: 8 kW
- Forced Cooling fan feature for rapid cooling below 500°C.
- Epoxy powder coating finish
Yudian AI 208
Product No: QC1B
Description: Computer enabled programmable temperature controller.
Output: SSR/Thyristor